Installing On The S7-300 Standard Rail; Installation On A Din Rail - Siemens SIMATIC Ident System Manual

Readers
5.7 SIMATIC RF290R
5.7.5.2

Installing on the S7-300 standard rail

Follow the steps below to mount the RF290R reader on a vertical S7-300 standard rail:
1. Place the device on the upper edge of the S7-300 standard rail (position A).
2. Screw the device to the mounting rail (position B).
Figure 5-18
5.7.5.3

Installation on a DIN rail

The RF290R reader is suitable for installation on 35 mm rails that comply with DIN EN
50022.
Note
The adapter for mounting on a DIN rail does not ship with the RF290R
The adapter for mounting on a DIN rail does not ship with the product. You can obtain a pack
of three with the following article number: 6GK5798-8ML00-0AB3.
The mounting fittings consist of the following parts:
• 1 DIN rail slider
• 1 spring
• 2 screws
134
Installing the RF290R reader on the S7-300 standard rail
System Manual, 07/2015, J31069-D0227-U001-A9-7618
SIMATIC RF200