Mounting On Metal - Siemens SIMATIC Ident System Manual

7.4.3

Mounting on metal

Mounting on metal
Direct mounting of the MDS D124 on metal is not possible. A distance of ≥ 15 mm is
recommended. This can be achieved by mounting the transponder on a spacer, (see section
"Ordering data (Page 340)").
h
Figure 7-6
Flush-mounted in metal
It is possible to mount the MDS D124 in metal. However, with large antennas (for example
ANT D5) this leads to a reduction of the ranges.
h
a
Figure 7-7
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
≥ 15 mm
Mounting of the MDS D124 on metal with spacer
≥ 15 mm
≥ 25 mm
Flush-mounting of MDS D124 in metal with spacer
Transponder
7.4 MDS D124
197