Abbreviations And Naming Conventions - Siemens SIMATIC Ident System Manual

Introduction

1.1 Abbreviations and naming conventions

● Operating instructions "RF310M"
(https://support.industry.siemens.com/cs/us/en/view/51812642)
● Product information "RF200 command set"
(https://support.industry.siemens.com/cs/us/en/view/44864850)
History
The following issues of the SIMATIC RF200 system manual have been published:
Output
03/2011
05/2011
09/2011
03/2013
09/2013
07/2015
1.1 Abbreviations and naming conventions
The following terms/abbreviations are used synonymously in this document:
Write/read device (SLG)
Mobile data storage unit (MDS)
Interface module (ASM)
16
Note
First edition
Expansion of the documentation with the addition of the device variant RF260R with
RS-232 interface
Expansion of the documentation with the device variant RF240R
Expansion of the documentation with the device variant RF290R
Expansion of the documentation by the following:
the device variant RF250R
•
the device variants RF240R and RF260R with ASCII interface
•
Antennas ANT 8, ANT 12, ANT 18 and ANT 30
•
Transponders
•
Expansion of the documentation by the following:
ANT 3 antennas
•
MDS D5xx transponder
•
Mobile reader RF210R
•
Readers
Transponder, tag
Communications module (CM)
System Manual, 07/2015, J31069-D0227-U001-A9-7618
SIMATIC RF200