Siemens SIMATIC Ident System Manual page 278

Transponder
7.23 MDS D521
Mounting information for adhesion
● Drill installation hole
● The adhesive surfaces must be dry, free from dust, oil, stripping agents and other
impurities
● Apply adhesive according to the manufacturer's processing instructions
● Press in MDS D521 using your finger; antenna side to the outside (see figure "Flush-
mounting of MDS D521 in metal with tools")
● Remove residues of adhesive
● Allow to cure according to the manufacturer's instructions
● Flush-mounting of MDS D521 in metal with tools
Installation examples
Figure 7-60
Figure 7-61
278
Installation example of MDS D521 in a steep cone
Installation example of MDS D521 in a stud bolt
System Manual, 07/2015, J31069-D0227-U001-A9-7618
SIMATIC RF200