Related Manuals for Siemens SIMATIC SLG D11
Summary of Contents for Siemens SIMATIC SLG D11
- Page 1 SLG D11 SLG D11S ANT D2 SIMATIC Sensors RFID systems SLG D11/D11S with ANT D2 Operating Instructions 08/2008 Siemens Industrial A5E02142372-02...
-
Page 2: A5E02142372
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. -
Page 3: Table Of Contents
Field data for MDS and SLG......................17 Transmission window........................19 Metal-free area..........................20 Minimum distance between several ANT D2 antennas...............21 Dimension drawing ........................21 Traversing speed with SLG D11/D11S and ANT D2 ..............22 SLG D11/D11S with ANT D2 Siemens Industrial Operating Instructions, 08/2008, A5E02142372-02... - Page 4 Table of contents SLG D11/D11S with ANT D2 Operating Instructions, 08/2008, A5E02142372-02...
-
Page 5: Slg D11
6GT2698-0AA20 and country-specific plug. ANT D2 6GT2698-5BB00 ANT D5 6GT2698-5AA00 24 V connecting cable, Length 5 m 6GT2491-1HH50 RS 232 cable Length 5 m 6GT2691-0BH50 Length 20 m 6GT2691-0BN20 SLG D11/D11S with ANT D2 Siemens Industrial Operating Instructions, 08/2008, A5E02142372-02... -
Page 6: Technical Specifications
SLG D11 1.3 Technical specifications Technical specifications Table 1- 3 Technical data of SLG D11 Inductive interface to the MDS Transmission frequency 13.56 MHz Transponders supported Transponders to ISO 15693 and I-Code1 Serial interface to the user RS 232 Transmission protocol Asynchronous 8 bit Data transmission rate 9600 baud to 38.4 Kbaud (adjustable) -
Page 7: Fcc And Ic Information
UL 60950 • FCC and IC information FCC information Siemens MOBY D SLG D11 FCC ID: NXW-MOBYD-SLGD11 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may cause undesired operation. -
Page 8: Dimension Drawing
SLG D11 1.5 Dimension drawing Dimension drawing Figure 1-1 SLG D11 dimension drawing SLG D11/D11S with ANT D2 Operating Instructions, 08/2008, A5E02142372-02... -
Page 9: Slg D11S
ASM 452 Connectable ASM • ASM 456 • ASM 473 • ASM 475 • RF170C • RF180C • Programming options e.g. via FC45 Degree of protection IP65 Multitag capability SLG D11/D11S with ANT D2 Siemens Industrial Operating Instructions, 08/2008, A5E02142372-02... -
Page 10: Ordering Data
SLG D11S 2.2 Ordering data Ordering data Table 2- 1 Ordering data for SLG D11S Product Order No. Basic write/read device SLG D11S without antenna; with 6GT2698-2AC00 RS 422 serial interface for connecting to the ASM. Table 2- 2 Ordering data (accessories) Accessories Order No. -
Page 11: Technical Specifications
2 x M5 screws Tightening torque ≤ 2 Nm (at room temperature) Ambient temperature Operation -25 °C to +55 °C • • Transport and storage -25 °C to +70 °C • • SLG D11/D11S with ANT D2 Siemens Industrial Operating Instructions, 08/2008, A5E02142372-02... -
Page 12: Fcc And Ic Information
UL 60950 • FCC and IC information FCC information Siemens MOBY D SLG D11S FCC ID: NXW-MOBYD-SLGD11 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may cause undesired operation. -
Page 13: Dimension Drawing
SLG D11S 2.5 Dimension drawing Dimension drawing Figure 2-1 Dimension drawing for SLG D11S SLG D11/D11S with ANT D2 Siemens Industrial Operating Instructions, 08/2008, A5E02142372-02... - Page 14 SLG D11S 2.5 Dimension drawing SLG D11/D11S with ANT D2 Operating Instructions, 08/2008, A5E02142372-02...
-
Page 15: Ant D2
Connectable SLGs • SLG D11S • Degree of protection IP65 Ordering data Table 3- 1 ANT D2 ordering data Product Order No. ANT D2 6GT2698-5BB00 incl. antenna cable (3.3 m) SLG D11/D11S with ANT D2 Siemens Industrial Operating Instructions, 08/2008, A5E02142372-02... -
Page 16: Technical Specifications For Ant D2
ANT D2 3.3 Technical specifications for ANT D2 Technical specifications for ANT D2 Table 3- 2 Technical specifications for antennas Max. write/read distance See Field data for MDS and SLG (Page 17) ANT to MDS (S Dimensions in mm (L x W x H) 75 x 75 x 40 Antenna cable length in 3.3 m... -
Page 17: Field Data For Mds And Slg
SLG D11S ANT D2 Limit distance in mm (S SLG D11 ANT D2 SLG D11S ANT D2 Green Main field (processing field) Blue Secondary fields Figure 3-1 Distance definition SLG D11/D11S with ANT D2 Siemens Industrial Operating Instructions, 08/2008, A5E02142372-02... - Page 18 ANT D2 3.4 Field data for MDS and SLG For more information on the transfer window, refer to Chapter Transmission window (Page 19). Note Tips if the range is too short If the range of the antenna is too short, you must check •...
-
Page 19: Transmission Window
The operating range lies between level 1 and level 3. The operating range between level 1 and 2 includes secondary fields. The recommended operating range therefore lies in the green main field between Level 2 and Level 3. SLG D11/D11S with ANT D2 Siemens Industrial Operating Instructions, 08/2008, A5E02142372-02... -
Page 20: Metal-Free Area
ANT D2 3.6 Metal-free area Limit distance (S The limit distance lies on Level 3 Lateral view Level 1 Lateral view Level 2 L: Length of the transmission window Metal-free area Direct mounting of the ANT D2 on metal is permitted. Figure 3-3 Metal-free area for ANT D2 SLG D11/D11S with ANT D2... -
Page 21: Minimum Distance Between Several Ant D2 Antennas
Minimum distance between several ANT D2 antennas Minimum distance D from ANT D2 to ANT D2 D ≥ 500 mm Dimension drawing Figure 3-5 Dimension drawing for ANT D2 SLG D11/D11S with ANT D2 Siemens Industrial Operating Instructions, 08/2008, A5E02142372-02... -
Page 22: Traversing Speed With Slg D11/D11S And Ant D2
ANT D2 3.9 Traversing speed with SLG D11/D11S and ANT D2 Traversing speed with SLG D11/D11S and ANT D2 The following table shows the traversing speed of a transponder through the main field. The direction of motion of the transponder is vertical. Table 3- 6 Traversing speed with SLG D11/D11S and ANT D2 Transponder speed with...