Wide-Range Power Supply Unit For Simatic Rf Systems; Features - Siemens SIMATIC Ident System Manual

A.2.3

Wide-range power supply unit for SIMATIC RF systems

A.2.3.1

Features

Wide-range power supply unit for SIMATIC RF systems
Characteristics
•
•
•
•
•
•
•
•
•
•
Description
The wide-range power supply unit for SIMATIC RF systems is a universal compact power
supply and provides the user with an efficient, cost-saving solution for many different mid-
range power supply tasks.
The primary switched power supply is designed for use on single-phase AC systems. The
two DC outputs (sockets) are connected in parallel and protected by a built-in current limiting
circuit against overload and short-circuits.
The device is vacuum-cast and prepared for Safety Class 2 applications. The EU and UK
versions satisfy the low-voltage guideline as well as the current EU standards for CE
conformity. Furthermore, the US version has been UL-certified for the US and Canada.
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
③
Wide-range input for use worldwide
Dimensions without mains cable: 175 x 85 x 35 mm
Dimensions including mains cable: 250 x 85 x 35 mm
CE-compliant (EU and UK versions)
UL-certified for US and Canada (US version)
Mechanically and electrically rugged design
① ②
Secondary side , : 24 VDC / 3 A
Short-circuit and no-load stability
Suitable for frame mounting
3 versions for use in the EU, UK, US
Appendix
A.2 Accessories
①
DC output 1
②
DC output 2
③
Network connector
321