Operation In Static And Dynamic Mode - Siemens SIMATIC Ident System Manual

4.1.6

Operation in static and dynamic mode

Operation in static mode
If working in static mode, the transponder can be operated up to the limit distance (S
transponder must then be positioned exactly over the reader:
Figure 4-7
Note
Note that in a metallic environment the values for the limit distance are reduced.
Operation in dynamic mode
When working in dynamic mode, the transponder moves past the reader. The transponder
can be used as soon as the intersection (SP) of the transponder enters the circle of the
transmission window. In dynamic mode, the operating distance (S
[Operating distances, see Chapter Field data of transponders and readers (Page 36)]
Figure 4-8
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
Operation in static mode
Operation in dynamic mode
RF200 system planning
4.1 Fundamentals of application planning
) is of primary importance.
a
). The
g
33