System Integration - Siemens SIMATIC Ident System Manual

System integration

The communication modules (interface modules) are links between the RFID components
(reader and transponder) and the higher-level controllers (e.g. SIMATIC S7), or PCs or
computers.
Interfacing to the controller
The readers are connected to the controller via the following interface or communications
modules:
● ASM 456
● ASM 475
● SIMATIC RF120C
● SIMATIC RF160C
● SIMATIC RF170C
● SIMATIC RF180C
● SIMATIC RF182C
● RFID 181EIP
Function blocks, interface modules/communication modules and readers
Function blocks are used for integration into the SIMATIC. They are used to transfer the
input parameters to the reader using the "init_run"(RESET) command.
You will find information on the following blocks on the Internet in "Industry Online Support -
RFID (https://support.industry.siemens.com/cs/ww/en/ps/15105/man)".
● FB 45 for MOBY U, MOBY D, RF200, RF300
● FB 55
● Ident profile and Ident blocks, standard function for RFID systems
● RFID standard profile; standard functions for RFID systems
● RF160C communications module with FC 44
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
8
301