Accessories; Antenna Splitter - Siemens SIMATIC Ident System Manual

One of the following markings on a device is indicative of the corresponding approval:
A.2

Accessories

A.2.1

Antenna splitter

Area of application
Antenna splitter
The antenna splitter is a power distributor with electrical isolation between the input (IN) and
the two outputs (OUT1, OUT2). At the operating frequency of 13.56 MHz, the impedance at
all inputs and outputs is 50 ohms.
The device is used to connect 2 to 4 antennas to a reader. Gate, C and tunnel arrangements
are therefore possible (see section "Configuration options").
Ordering data
Table A- 1
Antenna splitter
(incl. one antenna connecting cable 3.3 m)
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
Russia, Belarus and Kazakhstan
Characteristics
Area of application
Readers that can be connect-
ed
Number of connectable
antennas
Connectable antennas
Degree of protection
Ordering data for the antenna splitter
A.2 Accessories
Designed for distributed mounting of
antennas in warehouses, logistics and
distribution
RF290R
max. 4
(by cascading)
ANT D5
•
ANT D6
•
ANT D10
•
IP65
Article number
6GT2690-0AC00
Appendix
311