Ref. & Feedb.; Inputs And Outputs - Danfoss VLT FC 51 Series Programming Manual

VLT Micro Drive FC 51
16-36 Inv. Nom. Current
Range:
0.00 A
16-37 Inv. Max. Current
Range:
0.00 A
16-38 SL Controller State
Range:
*
0
4.13.5. 16-5* Ref. & Feedb.
Parameters for reporting the reference and feedback input.
16-50 External Reference
Range:
0.0%
16-51 Pulse Reference
Range:
0.0 %
16-52 Feedback
Range:
0.000

4.13.6. 16-6* Inputs and Outputs

Parameters for reporting the digital and analog IO ports.
16-60 Digital Input 18, 19, 27, 33
Range:
*
0
16-61 Digital Input 29
Range:
*
0
16-62 Analog Input 53 (volt)
Range:
*
0.00
Function:
* [0.01 - 10000.00 A] View continuous nominal inverter current.
Function:
* [0.1 - 10000.00 A] View intermittent maximum inverter current (150%).
Function:
[0 - 255] View number of active SLC state.
Function:
* [-200.0 - 200.0%] View sum of all external references in percent.
Function:
* [-200.0 - 200.0%] View actual pulse input converted to a reference in percent.
Function:
* [-4999.000 - View analog or pulse feedback in Hz.
4999.000]
Function:
[0 - 1111] View signal states from active digital inputs.
Function:
[0 - 1] View signal state on digital input 29.
Function:
[0.00 - 10.00 V] View input voltage on analog input terminal.
MG.02.C2.02 - VLT ® is a registered Danfoss trademark
4. Parameter Descriptions
4
73