Drive Status - Danfoss VLT FC 51 Series Programming Manual

4. Parameter Descriptions
16-11 Power [hp]
Range:
0 hp
16-12 Motor Voltage
Range:
0.0
4
16-13 Frequency
Range:
0.0 Hz
16-14 Motor Current
Range:
0.00 A
16-15 Frequency [%]
Range:
0.00
16-18 Motor Thermal
Range:
0%

4.13.4. 16-3* Drive Status

Parameters for reporting the status of the frequency converter.
16-30 DC Link Voltage
Range:
0 V
16-34 Heat Sink Temp.
Range:
*
0
16-35 Inverter Thermal
Range:
0%
72
[0 - 99 hp ]
* [0.0 - 999.9 V]
* [0.0 - 400.0 Hz]
* [0.00 - 1856.00 A]
*
[-100.00 - 100.00%]
*
[0 - 100%]
* [0 - 10000 V]
[0 - 255]
* [0 - 100%]
MG.02.C2.02 - VLT
Function:
View output power in hp.
Function:
View motor phase voltage.
Function:
View output frequency in Hz.
Function:
View motor phase current.
Function:
View a two-byte word reporting actual motor frequency as a
percentage of par. X-XX
Function:
View calculated thermal motor load as percentage of estimated
thermal motor load.
Function:
View DC-link voltage.
Function:
View heat sink temperature of frequency converter.
Function:
View calculated thermal load on frequency converter in relation
to estimated thermal load on frequency converter.
® is a registered Danfoss trademark
VLT Micro Drive FC 51