Digital/Bus; Coasting Select; Quick Stop Select; Fc Port Parity - Danfoss VLT FC 51 Series Programming Manual

4. Parameter Descriptions

8-33 FC Port Parity

Option:
[0]
[1]
[2]
[3]
4
8-35 Minimum Response Delay
Range:
10 ms
8-36 Max Response Delay
Range:
5.000 s

4.9.5. 8-5* Digital/Bus

Parameters for configuring control word Digital/Bus merging.

8-50 Coasting Select

Option:
[0]
[1]
[2]
[3]

8-51 Quick Stop Select

Option:
[0]
[1]
[2]
54
* No Parity
Odd parity
No Parity (2 stopbit)
No Parity (1 stopbit)
[1 - 500 ms]
*
[0.010 - 10.00 s]
NB!
Parameters are only active when par. 8-01,
word
[0].
Digital Input
Bus
LogicAnd
* LogicOr
Digital Input
Bus
LogicAnd
MG.02.C2.02 - VLT
Function:
This parameter only affects Modbus as FC bus always has even
parity.
Function:
Specify minimum delay time between receiving a request and
transmitting a response.
Function:
Specify maximum permissible delay time between transmitting
a request and receiving a response. Exceeding this time delay
causes control word timeout.
Control SIte
Function:
Select control of coasting function via digital input and/or bus.
Activation via a digital input.
Activation via serial communication port.
Activation via serial communication port and a digital input.
Activation via serial communication port or a digital input.
Function:
Select control of quick stop function via digital input and/or bus.
Activation via a digital input.
Activation via serial communication port.
Activation via serial communication port and a digital input.
® is a registered Danfoss trademark
VLT Micro Drive FC 51
Digital and control
, is set to