Power Connector (P14); Battery Connector (P24); Standalone Debug Agent Connector (Zp1) - Analog Devices ADSP-BF526 EZ-Board Manual

Power Connector (P14)

The power connector (
the EZ-Board.
Part Description
0.65 mm power jack
5.0VDC@2.5A power supply

Battery Connector (P24)

is a connection point of a single 3.3V lithium ion battery. Ensure that
P24
the positive lead of the battery is inserted to the side labeled "+", and the
negative terminal is inserted to the side labeled "–". To remove the battery
leads, press the white plastic button in and slide out the lead. The battery
is not connected until the
Part Description
Wire to board, push-in, 16–28 AWG
3.7V lithium ion battery, 950 mAh

Standalone Debug Agent Connector (ZP1)

connects the standalone debug agent to the EZ-Board. The standalone
ZP1
debug agent requires both the
tion, see "CCES Install and Session Startup" on page 1-5
"VisualDSP++ Install and Session Startup" on page
ADSP-BF526 EZ-Board Evaluation System Manual
ADSP-BF526 EZ-Board Hardware Reference
) provides all of the power necessary to operate
J6
Manufacturer
CUI
Mating Power Supply (shipped with EZ-Board)
CUI STACK
switch is
SW22
Manufacturer
WEIDMULLER
Mating Battery (shipped with EZ-Board)
MOUSER
and
ZP1
Part Number
045-0883R
DMS050260-P12P-SZ
.
ON
Part Number
281-2020-ND
5169-UBP563450
connectors. For more informa-
P1
1-9.
or
2-35