Analog Devices ADSP-BF526 EZ-Board Manual page 15

• LEDs
• Nine LEDs: one board reset (red), three general-purpose
(amber), one PHY link (amber), one PHY activity (green),
one battery charging (amber), one battery low (amber), and
one battery good (green)
• Push buttons
• Five push buttons: one reset, two programmable flags with
debounce logic, wake and sleep with debounce logic
• Expansion interface II™:
• Next generation of the expansion interface design, provides
access to most of the ADSP-BF526 processor signals
• Land grid array
• Easy probing of all port pins and most EBIU signals
• Other features
• JTAG ICE 14-pin header
• USB on-the-go (OTG) connector
• Host interface connector
• Blackfin and SDRAM power measurement jumpers
For information about the hardware components of the EZ-Board, refer
to Chapter 2, "ADSP-BF526 EZ-Board Hardware
ADSP-BF526 EZ-Board Evaluation System Manual
Preface
Reference".
xv