Analog Devices ADSP-BF526 EZ-Board Manual page 33

2. To connect to a new EZ-Board session, start Session Wizard by
selecting one of the following.
• From the Session menu, New Session.
• From the Session menu, Session List. Then click New Ses-
sion from the Session List dialog box.
• From the Session menu, Connect to Target.
3. The Select Processor page of the wizard appears on the screen.
Ensure Blackfin is selected in Processor family. In Choose a target
processor, select ADSP-BF526. Click Next.
4. The Select Connection Type page of the wizard appears on the
screen. For standalone debug agent connections, select EZ-Board
and click Next. For emulator connections select Emulator, and
click Next
5. The Select Platform page of the wizard appears on the screen.
For standalone debug agent connections, ensure that the selected
platform is ADSP-BF526 EZ-Board via Debug Agent. For emula-
tor connections, choose the type of emulator that is connected.
Specify your own Session name for the session or accept the default
name.
The session name can be a string of any length; although, the box
displays approximately 32 characters. The session name can
include space characters. If you do not specify a session name,
VisualDSP++ creates a session name by combining the name of the
selected platform with the selected processor. The only way to
change a session name later is to delete the session and open a new
session.
Click Next.
ADSP-BF526 EZ-Board Evaluation System Manual
Using The ADSP-BF526 EZ-Board
1-11