AudioCodes E-SBC User Manual page 255

CHAPTER 16 Services
'Connection Status'
connection-status
[LdapConfiguration_
ConnectionStatus]
Query
'LDAP Password'
password
[LdapConfiguration_
LdapConfPassword]
'LDAP Bind DN'
Parameter
Mediant 1000 Gateway & E-SBC | User's Manual
Description
■ [1] Yes = The device verifies the authentication of
the certificate received from the LDAP server. The
device authenticates the certificate against the
trusted root certificate store associated with the
associated TLS Context (see 'TLS Context'
parameter above) and if ok, allows communication
with the LDAP server. If authentication fails, the
device denies communication (i.e., handshake fails).
The device can also authenticate the certificate by
querying with an Online Certificate Status Protocol
(OCSP) server whether the certificate has been
revoked. This is also configured for the associated
TLS Context.
Note: The parameter is applicable only if the 'Use TLS'
parameter is configured to Yes.
(Read-only) Displays the connection status with the
LDAP server.
■ "Not Applicable"
■ "LDAP Connection Broken"
■ "Connecting"
■ "Connected"
For more information about a disconnected LDAP
connection, see your Syslog messages generated by
the device.
Defines the user password for accessing the LDAP
server during connection and binding operations.
■ LDAP-based SIP queries: The parameter is the
password used by the device to authenticate itself,
as a client, to obtain LDAP service from the LDAP
server.
■ LDAP-based user login authentication: The
parameter represents the login password entered by
the user during a login attempt. You can use the $
(dollar) sign in this value to enable the device to
automatically replace the $ sign with the user's login
password in the search filter, which it sends to the
LDAP server for authenticating the user's username-
password combination. For example, $.
Note:
■ The parameter is mandatory.
■ By default, the device sends the password in clear-
text format. You can enable the device to encrypt the
password using TLS (see the 'Use SSL' parameter
below).
Defines the LDAP server's bind Distinguished Name
(DN) or username.
- 217 -