AudioCodes E-SBC User Manual page 299

CHAPTER 16 Services
Parameter
[HTTPServer_Index]
'Name'
name
[HTTPServer_
ServiceName]
'Domain Name'
domain-name
[HTTPServer_
DomainName]
'Listening Interface'
listening-int
[HTTPServer_
ListeningInterface]
'HTTP Listening Port'
http-port
[HTTPServer_
HTTPListeningPort]
'HTTPS Listening Port'
https-port
[HTTPServer_
HTTPSListeningPort]
'TLS Context'
tls-context
[HTTPServer_
TLSContext]
Note:
■ Each row must be configured with a unique index.
■ The parameter is mandatory.
Defines a descriptive name, which is used when associating the row
in other tables.
The valid value is a string of up to 40 characters. By default, no value
is defined.
Note:
■ Each row must be configured with a unique name.
■ The parameter is mandatory.
■ The parameter value cannot contain a forward slash (/).
Defines a domain name (FQDN). This is configured only when
multiple DNS domains share the same IP address.
Note: The NGINX directive for this parameter is "server_name".
Assigns an IP Interface to the HTTP Proxy service. To configure IP
Interfaces, see Configuring IP Network Interfaces
Note:
■ The parameter is mandatory.
■ The NGINX directive for this parameter is " listen ip".
Defines the HTTP listening port, which is the local port for incoming
packets for the HTTP service.
Note:
■ The port number must not conflict with the ports used for the
Web interface, which is usually 80 for HTTP and 443 for HTTPS.
■ You must configure at least one port (HTTP or HTTPS port).
■ The NGINX directive for this parameter is "listen ip:port".
Defines the HTTPS listening port, which is the local port for
incoming packets for the HTTP service.
Note:
■ The port number must not conflict with the ports used for the
Web interface, which is usually 80 for HTTP and 443 for HTTPS.
■ You must configure at least one port (HTTP or HTTPS port).
■ The NGINX directive for this parameter is "listen ip:port ssl".
Assigns a TLS Context (TLS certificate). This is required if you have
specified an HTTPS listening port (see the 'HTTPS Listening Port'
parameter above). To configure TLS Contexts, see
Certificate Contexts on page 123.
Note: The NGINX directives for this parameter is "tls-context", "ssl_
certificate", "ssl_certificate_key", "ssl_ciphers", "ssl_protocols",
and "ssl_password_file".
- 261 -
Mediant 1000 Gateway & E-SBC | User's Manual
Description
on page 97.
Configuring TLS