Siemens Sinumerik 802D sl Programming Manual page 87

04.07
Table 3-11
M03
M04
M05
M08
M09
Designation of multiple M codes in a single block
It is possible to specify up to five M codes in a single block. The specified M codes
and sampling output are output at the same time. Concerning the combinations of
the M codes that can be specified in the same block, refer to the manuals publis-
hed by the machine tool builder for restrictions on them.
Further information
/FBFA/
© SIEMENS AG 2007 All rights reserved
SINUMERIK 802D sl/840D sl840D/840Di sl/840Di/810D ISO Turning - - 04.07 Edition
Other general M codes
M code
Spindle start, forward direction
Spindle start, reverse direction
Spindle stop
Coolant ON
Coolant OFF
SINUMERIK 840D/840Di/810D
Description of Functions
ISO Dialects for SINUMERIK
Movement Control Commands
3.7 Miscellaneous function (M function)
Function
(03.07 Edition)
3-87