Siemens Sinumerik 802D sl Programming Manual page 3

Preface
Structure of the documentation
The SINUMERIK documentation is structured in three levels:
S General documentation
S User documentation
S Manufacturer/service documentation.
An overview of publications that is updated monthly is provided in a number of lan-
guages in the Internet at:
http://www.siemens.com/motioncontrol
Follow menu items > "Support" > "Technical Documentation" > "Overview of Docu-
ments".
DOConWEB, the Internet edition of DOConCD, is available at:
http://www.automation.siemens.com/doconweb
Information on the training courses offered as well as FAQs (frequently asked
questions) are provided on the Internet at:
http://www.siemens.com/motioncontrol, "Support" menu item.
Target audience
This documentation is intended for:
Project engineers
S
S Technologists (from machine manufacturers)
S System startup (Systems/Machines
S Programmers
Standard scope
This documenation only describes the functionality if the standard version. Exten-
sions or changes made by the machine tool manufacturer are documented by the
machine tool manufacturer.
It may be possible to runfunctions that are not described in this document in your
controller. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case
of installation, operation or maintenance.
© SIEMENS AG 2007 All rights reserved
SINUMERIK 802D sl/840D sl840D/840Di sl/840Di/810D ISO Turning - - 04.07 Edition
iii