Siemens Sinumerik 802D sl Programming Manual page 127

04.07
Example
M3 S2500 ;
G00 X50.0 C0.0 ;
G84 Z--35.0 R--5.0 P500 F5.0 ;
C90.0 ;
C180.0 ;
C270.0 ;
G80 M05 ;
Face drilling cycle (G85)
Side drilling cycle (G89)
Format
G85 X(U)... C(H)... Z(W)... R... P... F... K... M... ;
or
G89 Z(W)... C(H)... X(U)... R... P... F... K... M... ;
X, C or Z, C: Hole position
Z or X: The distance from point R to the bottom of the hole
R: Distance from the initial level to R level
P: Dwell time at bottom of hole
F: Cutting feedrate
K: Number of repetitions (if required)
M: M code for clamping C-axis (if required)
G85 or G89 (G98 mode)
Fig. 4-38
P2: Dwell specified in GUD7, _ZSFR[22]
© SIEMENS AG 2007 All rights reserved
SINUMERIK 802D sl/840D sl840D/840Di sl/840Di/810D ISO Turning -- 04.07 Edition
Initial level
Mα
Mβ, P2
Point R
Point Z
P1
Enhanced Level Commands
4.1 Program support functions (1)
Rotate the tapping tool
Positioning X and C axis
Tapping hole 1
Tapping hole 2
Tapping hole 3
Tapping hole 4
Cycle cancel and tapping tool stop
G85 or G89 (G99 mode)
Mα
Point R
P1
Point R level
Mβ, P2
Point Z
4-127