Siemens Sinumerik 802D sl Programming Manual page 234

Index
O
Optional block skip, 1-16
P
Pattern repeat cycle, 4-112, 4-113, 4-114,
4-117
Polar coordinate interpolation, 2-35
Positioning, 2-23
Positioning in the error detect ON mode, 2-23
Program support functions, 4-89, 4-129
Programmable data input, 4-129
R
Rapid lift, 2-51
Rapid traverse, 1-17
Reference point return, 2-47
Reference point return check, 2-49
S
S function, 3-80
S5--digit command, 3-80
Second to fourth reference point return, 2-50
Setting data
axis--specific, D-219
channel--specific, D-220
list, E-226
Siemens mode, 1-11
Index-234
Simple call up, 4-140
Skip function, 4-135
Skip level, 1-16, 4-151
Spindle command, 3-80
Spindle function, 3-80
STOPRE, 3-60
Straight facing cycle, 4-98
Subprogram call up function, 4-130
Subprograms, 4-139
Switching between feed per minute mode and
feed per revolution mode, 1-21
Switchover, 1-12
T
T function, 3-84
Thread cutting, 2-38
Thread cutting cycle, 4-93, 4-102, 4-105,
4-106, 4-108
Thread cutting function, 2-38
Time--controlling commands, 3-72
Tool function, 3-84
Tool life control function, 4-138
Tool offset data memory, 3-73
Tool offset functions, 3-73
Tool position offset, 3-73
V
Variable lead thread cutting, 2-46
SINUMERIK 802D sl/840D sl840D/840Di sl/840Di/810D ISO Turning - - 04.07 Edition
© SIEMENS AG 2007 All rights reserved
04.07