Siemens Sinumerik 802D sl Programming Manual page 230

Alarms
Table F-1 Alarm number and alarm description, continued
Alarm no. Brief description
61801 Incorrect G code selected
61802 Incorrect axis type
61803 Programmed axis does not exist
61804 Programmed position beyond re-
ference point
61805 Value programmed in absolute
and incremental dimensions
61806 Incorrect axis assignment
61807 Incorrect spindle direction pro- -
grammed
61808 Final drilling depth or single dril- -
ling depth missing
61809 Drilling position not admissible
61810 ISO G cde not possible
61811 ISO axis designation not admis-
sible
61812 Incorrect numeral value(s) in
cycle call
61813 Incorrect GUD value
61814 Polar coordinatea not possible
61815 G40 not active
F-230
Source
CYCLE300, CYCLE371T,
CYCLE374T, CYCLE376T,
CYCLE383T, CYCLE384T,
CYCLE385T
CYCLE328, CYCLE330
CYCLE328, CYCLE330
CYCLE328, CYCLE330
CYCLE328, CYCLE330, CY-
CLE371T, CYCLE374T, CY-
CLE376T, CYCLE383T, CY-
CLE384T, CYCLE385T
CYCLE328
CYCLE384M
CYCLE383T, CYCLE384T,
CYCLE385T, CYCLE381M,
CYCLE383M, CYCLE384M,
CYCLE387M
CYCLE383T, CYCLE384T,
CYCLE385T
CYCLE383T, CYCLE384T,
CYCLE385T
CYCLE328, CYCLE330.
CYCLE371T, CYCLE374T,
CYCLE376T, CLE383T,
CYCLE384T, CYCLE385T
CYCLE371T, CYCLE376T,
CYCLE376T
CYCLE381M, CYCLE383M,
CYCLE384M, CYCLE387M
CYCLE374T, CYCLE376T
SINUMERIK 802D sl/840D sl840D/840Di sl/840Di/810D ISO Turning - - 04.07 Edition
Explanation/remedy
An illegal numerical value for the
CNC system was programmed
in the program call
CYCLE300<value> or in the cy-
cle setting data an incorrect va-
lue for the G code system was
specified.
The programmed axis is
assigned to a spindle
The programmed axis does not
exist in the system. Check
MD20050- -20080
The programmed intermediate
position or current position is
located behind the reference
point
The intermediate position is
programmed using both abso-
lute and incremental dimensions
The order of the axis assignment
is incorrect
The programmed spindle direc- -
tion conflicts with the spindle
direction used for the cycle
Total depth Z or single drilling
depth Q missing from G8x block
(first call of cycle)
The calling NC block contains
an ISO axis designation which
is not admissible
The calling NC block contains
a numeral value which is not
admissible
Not admissable numeral value
in cycle setting data
G40 was not active prior to the
cycle call
© SIEMENS AG 2007 All rights reserved
04.07