Overlays Menu - RED RANGER MONSTRO 8K VV Operation Manual

RED RANGER OPERATION GUIDE

OVERLAYS MENU

The Overlays menu includes settings that display on top of the monitor image.
TOOLS
The Tools menu provides access to false color and display modes.
For more information, see the
www.red.com/learn/red-101/exposure-false-color-zebra-tools.
FALSE COLOR MODES
False color modes include:
"False Color Modes: Off" below
"False Color Modes: Exposure" on the next page
"False Color Modes: Video" on the next page
"False Color Modes: Focus" on the next page
"False Color Modes: Edge" on the next page
"False Color Modes: Peaking" on page 77
"False Color Modes: Gio Scope" on page 77
NOTE: Only monitors with the Tools check box selected in the Monitor Control menu show the false colors. For more
information, go to "Tools" on
NOTE: The sharpness setting affects the false color modes. For more information, go to
previous page.
NOTE: False color modes affect video recorded through HD-SDI to an external recorder if the Tools check box is
selected in the Monitor Control menu. When recording through HD-SDI, use false color modes only to help configure
project settings, and then disable the mode before recording.
NOTE: Since the 3D LUT modifes the data displayed for the exposure tools, you cannot use the exposure tools with a
3D LUT.
DISPLAY MODES
Display modes include:
"Display Modes: Magnify" on page 77
"Display Modes: Log View" on page 78
"Display Modes: RAW" on page 78
"Display Modes: Horizon" on page 78
"Display Modes: Zebras" on page 79
FALSE COLOR MODES: OFF
To disable all false color modes, go to Menu > Overlays > Tools > False Color and select Off from the False Color
drop-down menu.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
Exposure with RED Cameras: False Color & Zebra Tools
page 71.
article , available at
"Output Sharpness" on the
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 7 5