Chapter 7: Audio System; Audio Overview; Set Up Audio - RED RANGER MONSTRO 8K VV Operation Manual

RED RANGER OPERATION GUIDE
CHAPTER 7:
AUDIO SYSTEM

AUDIO OVERVIEW

The camera has two (2) integrated dual channel digital stereo microphones that record uncompressed audio at 24-bit
48 kHz. These microphones offer you the ability to capture scratch-track audio.
The camera features a built-in headphone jack, so you can hear the audio during playback via headphones. Together,
the integrated microphones and headphone jack offer an audio solution for run-and-gun shoots.
Additionally, the camera has one full-size XLR audio jack for recording line level and microphone level audio.
The camera can record up to four (4) discrete stereo channels of uncompressed 24-bit, 48 kHz audio.
Input signals are routed via a high-quality pre-amplifier to achieve the desired recording levels and maximize dynamic
range.
®
Audio data is synchronized with video and timecode and embedded in the R3D file. You can export audio data from
®
REDCINE-X PRO as separate audio files.
Audio is also embedded in any HD-SDI output connected to the camera (except the MON-1 signal).

SET UP AUDIO

To set up audio, go to Menu > Settings > Audio. To adjust the input, pre-amplifier, and headphone settings, select
Control. To adjust the mix settings, select Mix.
Figure: Audio Menu
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 1 4 3