RED RANGER MONSTRO 8K VV Operation Manual page 69

RED RANGER OPERATION GUIDE
LGG (LIFT, GAMMA, GAIN)
NOTE: This menu is only available in Legacy mode. For more information, go to
Adjust the lift, gamma, and gain for the red channel, blue channel, and green channel individually.
3D LUT
Use the 3D LUT menu to apply and manage LUTs.
SELECT LUT
If you are recording to a 2K Apple ProRes or 2K Avid DNxHD/HR codec while the camera is in IPP2 mode, you can
chose to irreversibly encode (bake) the 3D LUT into the recorded file. For more information, go to
Format" on page 114.
When you apply a 3D LUT to a monitor, the name of the 3D LUT displays in the lower left corner of the Live Action
area for that monitor. The Display Preset feature controls which Color Space / Gamma Curve pairing and/or 3D LUT is
applied to the monitor. For more information, go to
NOTE: The 3D LUT indicator is part of the default "Standard (RED)" overlay, which you can override by selecting or
creating a different overlay. For more information, go to
To apply a 3D LUT, follow the instructions below:
1. Go to Menu > Image > 3D LUT.
2. Select a LUT from the Creative 3D LUT drop-down menu.
3. Select OK.
EXPORT/IMPORT LUTS
To export and import 3D LUTs, go to Menu > Image > 3DLUT > Import/Export.
3D LUTs can be stored on the camera or transferred to SSD to be shared with other cameras. When exporting 3D
LUTs from camera to an SSD, the 3D LUTs are saved to a folder on the SSD called "luts". When importing 3D LUTs
from an SSD to camera, the 3D LUTs must be stored on the SSD in a folder called "luts".
: Export selected 3D LUT from camera to SSD.
All: Export all 3D LUTs from camera to SSD.
: Import selected 3D LUT from SSD to camera.
All: Import all 3D LUTs from SSD to camera.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
"Display Preset" on page 71.
"Custom Overlays" on
"Image Pipeline" on page 63.
"Select Record File
page 82.
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 6 9