RED RANGER MONSTRO 8K VV Operation Manual page 63

RED RANGER OPERATION GUIDE
IMAGE PIPELINE
To set up the image pipeline, go to Menu > Image > Image Pipeline.
IMAGE PIPELINE MODE OPTIONS
The camera offers two (2) different ways to process your image. Each mode changes which sub-menus are available in
the Image menu.
Legacy: In Legacy mode, the camera provides the same color options that firmware v6.3 did. Enables the Color,
Gain, Curves, and LGG menus.
IPP2: Image Processing Pipeline 2 (IPP2) is the new image processing pipeline, which is available starting with
firmware v6.4. In IPP2, the camera applies REDWideGamutRGB, which is a color space designed to encompass all
colors a RED camera can generate without clipping. The camera then encodes the image using Log3G10, a gamma
curve that prevents clipping. Using this color space and gamma curve allows you to grade and make color
adjustments in post production, instead of in-camera. Selecting IPP2 enables the CDL menu, and hides the Color,
Gain, Curves, and LGG menus (since those are used for grading).
LEGACY MODE
To use Legacy mode, follow the instructions below:
1. Go to Menu > Image > Image Pipeline > Options.
2. Select Legacy from the Mode drop-down menu.
3. Select OK.
Figure: Legacy Mode
4. Select a color space from the Color Space drop-down menu.
5. Select a gamma curve from the Gamma Curve drop-down menu.
6. If you want to apply a 3D LUT, go to
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
"3D LUT" on page 69.
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 6 3