RED RANGER MONSTRO 8K VV Operation Manual page 126

RED RANGER OPERATION GUIDE
6. Select Scan to search for available wireless networks.
The available wireless networks (access points) display.
7. Highlight the wireless network that your device is connected to and select Select.
Figure: Select Wireless Network
8. If you select an encrypted network, follow the instructions below to enter the passphrase for the network:
A. Select a security option from the Encryption drop-down menu.
B. Tap or select the Passphrase text box.
C. Type the passphrase to access the network.
D. Select OK.
9. To enable/disable DHCP, select IP Config and set up the IP settings. For more information on configuring DHCP
and IP settings, go to
10. Select Connect at the bottom of the WiFi screen.
The IP address of the access point displays at the bottom of the WiFi screen after the camera connects to the
access point.
Figure: Select Connect
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
"Ethernet" on page 124.
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 1 2 6