RED RANGER OPERATION GUIDE
AUDIO PORTS
AUDIO
The 5-pin XLR connector provides input for two (2) audio channels. Use the adjacent Audio switch to set the audio
channels to line in (Line), Microphone level in (Mic), or microphone level in with 48 V 10mA phantom power (+48V). The
switch controls both channels together; the channels cannot be controlled independently.
Figure: Front Face of Audio Input (5-Pin XLR) Connector (Looking at the Camera)
PIN
SIGNAL
1
GROUND
2
CH1_P
3
CH1_N
4
CH2_P
5
CH2_N
HEADPHONE
The 3.5mm stereo jack provides two (2) channels of audio for monitoring. For maximum quality, use high impedance
headphones.
PIN
SIGNAL
TIP
LEFT
RING
RIGHT
SLEEVE
GND
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
5-PIN XLR CONNECTOR
DESCRIPTION
Camera ground
Channel 1 (left), positive voltage
Channel 1 (left), negative voltage
Channel 2 (right), positive voltage
Channel 2 (right), negative voltage
HEADPHONE JACK
DESCRIPTION
Left channel audio
Right channel audio
Camera ground
DIRECTION
N/A
In
In
In
In
DIRECTION
Out
Out
N/A
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 2 0 1