RED RANGER MONSTRO 8K VV Operation Manual page 168

RED RANGER OPERATION GUIDE
SCREEN FREEZES OR DOES NOT DISPLAY
SYMPTOM
The screen freezes or does not display.
POTENTIAL RESOLUTION
Perform a Hard Restore. For more information, go to
INTERMITTENT MOTION JITTER
SYMPTOM
A slight, intermittent motion jitter displays on the monitor.
POTENTIAL RESOLUTIONS
If you calibrate the sensor using the Auto Calibration method, the calibration map updates in the background when
camera settings change. The update may cause slight, intermittent motion jitter to the image on the monitor. The jitter
characteristic only displays in live preview, and does not affect recorded footage. For more information on sensor
calibration, go to "Sensor Calibration" on
LCD FLICKER
SYMPTOM
The LCD or monitor is flickering.
POTENTIAL RESOLUTIONS
Set the LCD frequency to 60 Hz. For more information, go to
Use a different cable.
Ensure cables are properly attached.
LCD BLANK AT STARTUP
SYMPTOM
When you turn on the camera, the LCD does not show any image.
POTENTIAL RESOLUTIONS
Turn off the camera. Wait at least three (3) seconds, and then turn the camera back on.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
"Perform a Hard Restore" on
page 138.
"Frequency" on
page 170.
page 71.
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 1 6 8