RED RANGER OPERATION GUIDE
IPP2 MODE
To use IPP2 mode, follow the instructions below:
1. Go to Menu > Image > Image Pipeline > Options.
2. Select IPP2 from the Mode drop-down menu. With IPP2, the Color Space and Gamma Curve are always
REDWideGamutRGB and Log3G10, respectively.
3. Select OK.
Figure: IPP2 Mode
4. If you want to apply a 3D LUT, go to
5. Select a color space from the Output Color Space drop-down menu.
6. Select a contrast setting from the Output Tone Map drop-down menu.
7. Select a highlight option from the Highlight Roll-Off drop-down menu.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
"3D LUT" on
page 69.
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 6 4