Lcd/Evf Adaptors - RED RANGER MONSTRO 8K VV Operation Manual

RED RANGER OPERATION GUIDE

LCD/EVF ADAPTORS

The LCD/EVF adaptors enable you to use legacy RED displays (which feature LCD/EVF connectors) with the RED
RANGER (which features pogo LCD/EVF connectors). For more information on available displays, go to
Electronic Viewfinders" on
ITEM
DSMC2 LCD/EVF Adaptor A
DSMC2 LCD/EVF Adaptor B
DSMC2 LCD/EVF Adaptor D
LCD/EVF ADAPTOR A
Figure: DSMC2 LCD/EVF Adaptor A
The DSMC2 LCD/EVF Adaptor A makes your existing RED Touch, RED PRO, and RED PRO Touch displays, as well
as RED EVFs, fully compatible with the RED RANGER. The DSMC2 LCD/EVF Adaptor A converts the pogo
connection on the RED RANGER to a 16-Pin 1B LCD/EVF port. The DSMC2 LCD/EVF Adaptor A is designed to attach
to the primary (top) EVF/LCD port on the RED RANGER.
When used along with the DSMC2 LCD/EVF Adaptor B, this adaptor enables you to mount a DSMC2 RED Touch LCD
away from the camera—to a NOGA arm or other stable mounting point.
The DSMC2 LCD/EVF Adaptor A is compatible with the BOMB EVF, (LCOS) and (OLED) models, or later.
LCD/EVF ADAPTOR B
Figure: DSMC2 LCD/EVF Adaptor B
The DSMC2 LCD/EVF Adaptor B converts the display signal from a pogo connection to a 16-Pin 1B LCD/EVF port.
When used along with the DSMC2 LCD/EVF Adaptor A or DSMC2 LCD/EVF Adaptor D, this adaptor enables you to
mount a DSMC2 RED Touch LCD away from the camera—to a NOGA arm or other stable mounting point.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
page 24.
PART NUMBER
720-0037
720-0038
720-0055
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 2 9
"Displays and