RED RANGER MONSTRO 8K VV Operation Manual page 172

RED RANGER OPERATION GUIDE
NO MON-1 SIGNAL
SYMPTOM
The MON-1 port does not output a signal.
EXPLANATION
The secondary LCD/EVF port (on the side of the camera) and the MON-1 port cannot be used at the same time. For
more information, go to "Monitor Preferences" on
POTENTIAL RESOLUTIONS
If an LCD or EVF is connected to the secondary LCD/EVF port (on the side of the camera), remove the LCD or EVF.
Ensure that HD-SDI monitoring/recording is set up correctly. For more information, go to
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
page 70.
"Record" on page 43.
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 1 7 2