Audio During Playback - RED RANGER MONSTRO 8K VV Operation Manual

RED RANGER OPERATION GUIDE
INCOMING AUDIO CHANNELS
When you select Input as the VU Meter Source, the Audio Meter displays the incoming audio channels (default). For
more information, go to "VU Meter" on
MIC-1 and MIC-2 inputs on the camera. Channel 3 and Channel 4 are greyed out unless the camera detects audio
input.
The channel names selected in the Audio menu determine the channel names displayed in the Audio Meter.
The Audio Meter shows the incoming audio signal when a source is selected, even if the channel is not recorded.
When a channel is recorded, the channel indicator left of the Audio Meter is green.
OUTGOING AUDIO
When you select Output as the VU Meter Source, the Audio Meter displays the Headphone Mix, Audio Out Mix, and
Monitor Mix levels. For more information, go to
When recording to an external device, use the Output levels to help accurately monitor recorded audio.
AUDIO METER LEVELS
Figure: Audio Meter
The camera updates the Audio Meter 12 times per second with the maximum signal from the last 1/12 of a second
period. The range of the Audio Meter is –52 dBFS to 0 dBFS.
The lines and colors indicate danger of clipping, as described in the table below:
LINE
First line (far left border; solid) –52 dBFS Green
Second line (solid)
Third line (dashed)
Fourth line (dashed)
Fifth line (far right border;
solid)
NOTE: In the American broadcast and post production systems, –20 dBFS roughly corresponds to 0 VU and 4 dBu. In
a digital system, dBu is an approximation; the correct unit for digital audio levels is dBFS.

AUDIO DURING PLAYBACK

The camera plays all recorded channels during playback(via headphones and HD-SDI monitors), and automatically
unmutes any muted audio outputs.
To access audio settings during playback, go to Menu > Settings > Audio and select the following tabs:
Control
Mix
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
page 80. Channel 1 and Channel 2 are the default channels, correlating with the
"VU Meter" on
DBFS COLOR DESCRIPTION
Audio is not clipping
–20 dBFS Green Audio is not clipping
–12 dBFS Yellow Audio close to clipping
–2 dBFS Red Audio is clipping
0 dBFS Red Audio is clipping (if signal exceeds –1 dBFS, the whole bar is
red)
page 80.
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 1 4 6