RED RANGER MONSTRO 8K VV Operation Manual page 199

RED RANGER OPERATION GUIDE
GIG-E (ETHERNET)
The GIG-E 9-pin 0B connector provides a 1000BASE-T (IEEE 802.3ab) gigabit Ethernet connection for remote camera
setup, master/slave camera communication, and external metadata ingest. Since the GIG- E connector does not
support slower speeds (10BASE-T and 100BASE-T), ensure that any device you connect to supports 1000BASE-T.
Figure: Front Face of the GIG-E Connector (Looking at the Camera)
PIN SIGNAL
1 BI_DC+
2 BI_DC-
3 BI_DD+
4 BI_DD-
5 BI_DA-
6 BI_DA+
7 BI_DB+
8 BI_DB-
9 N/A
NOTE: Mating connector is FGG.0B.309.CLAD.
COMPATIBLE CABLES
790-0159: RED GIG-E Straight-to-CAT5E Ethernet Cable (9')
790-0557, 790-0655: RED GIG-E Right-to-CAT5E Ethernet Cable (9')
790-0163: Master/Slave Gig-E Cable (4')
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9-PIN 0B GIG-E CONNECTOR
DESCRIPTION
Data pair C+
Data pair C-
Data pair D+
Data pair D-
Data pair A-
Data pair A+
Data pair B+
Data pair B-
Do not connect
DIRECTION
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 1 9 9