RED RANGER MONSTRO 8K VV Operation Manual page 125

V7.2
Table of Contents

Advertisement

RED RANGER OPERATION GUIDE
CONNECT WIRELESSLY TO A DEVICE VIA AD-HOC MODE
In Ad-Hoc mode, the camera and your device connect to each other. To connect the camera to your device via an ad-
hoc network, follow the instructions below:
 1. Go to Menu > Settings > Setup > Communication.
 2. Select the WiFi tab.
 3. Select Ad-Hoc from the Mode menu.
 4. Select a wireless channel from the Channel drop-down menu. The default is Ch1, and you can select one out of
11 channels.
 5. Select a security option from the Encryption drop-down menu:
NONE: The connection will be unsecured.
WPA2: The connection will be encrypted via WPA2.
 6. If you selected WPA2 as the encryption option, type the passphrase that will be required to access the network.
 7. Close the WiFi screen.
 8. Connect your device to the ad-hoc network created by the camera. The steps in this procedure depend on what
type of device and operating system you are using. For example, if you are connecting an iOS device, go to
Settings > Wi-Fi > Devices, and select the camera name.
The camera name displays on the WiFi screen in-camera. The camera and your device are now connected.
NOTE: If you created a passphrase for the network, you will need to enter that passphrase.
CONNECT WIRELESSLY TO A DEVICE VIA INFRASTRUCTURE MODE
In Infrastructure mode, the camera and your device both connect to an access point, and communicate through that
wireless network. The camera can connect to access points that are not encrypted, use WPA encryption, or use WPA2
encryption. To connect the camera to your device via an existing wireless network, follow the instructions below:
 1. Connect your device to a wireless network. The access point for the network must have DHCP enabled.
 2. Make sure that you know the name and password for the network, since you will need that information to connect
the camera to the same network.
 3. Go to Menu > Settings > Setup > Communication.
 4. Select the WiFi tab.
 5. Select Infrastructure from the Mode menu.
Figure: WiFi Menu
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D   |   1 2 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents