RED RANGER MONSTRO 8K VV Operation Manual page 133

RED RANGER OPERATION GUIDE
MAINTENANCE
The Maintenance menu includes: Save Log, Upgrade, Calibrate, Self-Test, Restore System, Rediscover, System
Status, and OLPF.
SAVE A LOG FILE
A log file is a detailed text file of the processes and operations performed by the camera. If you contact support, you
may be asked to send a log file.
To save a log file, follow the instructions below:
1. Ensure that an SSD is properly mounted to the camera.
2. Go to Menu > Settings > Maintenance.
3. Select Save Log.
The log file is saved as a *.txt file in the SSD root directory.
For more information about RED support or to create a support ticket, go to https://support.red.com.
NOTE: The camera automatically saves a log file when it is turned off properly and an SSD is mounted.
UPGRADE
To access the Upgrade menu, go to Menu > Settings > Maintenance > Upgrade.
You can check for upgrades for the following items:
Camera: Go to "Upgrade Camera Firmware" on
Media: For more information on the media upgrade procedure, see the
www.red.com/downloads.
CALIBRATE
The Calibrate menu includes:
Sensor: For more information, go to
Gyro/Acc: For more information, go to
GYROSCOPE AND ACCELEROMETER CALIBRATION
The internal three-axis gyroscope and three-axis accelerometer need to be calibrated for the Horizon overlay to
function properly. The Gyro/Acc calibration file is stored in the flash memory of the camera, so you DO NOT need to
recalibrate after restoring the camera or upgrading firmware. For more information, go to
page 78.
To calibrate the Horizon overlay, follow the instructions below:
1. Turn on the camera and place it on a level surface.
2. Wait for the camera core temperature to reach room temperature.
3. Go to Menu > Settings > Maintenance > Calibrate > Gyro/Acc and select Low Temperature Calibration.
4. After the calibration finishes, wait for the camera core temperature to reach maximum operating temperature.
5. When the camera reaches maximum operating temperature, select High Temperature Calibration.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
page 161.
"Sensor Calibration" on page 138.
"Gyroscope and Accelerometer Calibration"
DSMC Media Operation Guide, available at
below.
"Display Modes: Horizon" on
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 1 3 3