RED RANGER MONSTRO 8K VV Operation Manual page 154

RED RANGER OPERATION GUIDE
SET UP MASTER/SLAVE OPERATION
1. Connect the GIG-E port on one camera to the GIG-E port on the other camera using the Master/Slave Gig-E
Cable.
2. On the Master camera, follow the instructions below:
A. Go to Menu > Settings > Setup > Communication.
B. Type a name for the camera (Example: CAM A, LEFT, MASTER, etc) in the Camera ID field.
C. Set Target to All.
Figure: Master Settings
D. Go to Menu > Settings > Setup > Communication and select the Ethernet tab.
E. Select the Camera to Camera the check box.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 1 5 4