RED RANGER MONSTRO 8K VV Operation Manual page 37

RED RANGER OPERATION GUIDE
INSTALL THE FOCUS HOOK SCREW
The camera comes with a screw stored in the bottom of the media bay, called the focus hook screw. You can install
this screw in the Focus Hook Mounting point (along the sensor plane), and then pull focus from that location. You can
either attach measuring tape directly to the screw, or you can install a hook to the screw, and attach the measuring
tape to the hook.
To install the focus hook screw, follow the instructions below:
REQUIRED TOOL(S): Slotted screwdriver
1. Remove the focus hook screw from the Focus Hook Screw Storage Location on the media bay using a slotted
screwdriver.
Figure: Focus Hook Screw Storage Location
2. Tighten the focus hook screw into the Focus Hook Mounting Point on the media bay using a slotted screwdriver.
WARNING: DO NOT OVERTIGHTEN.
Figure: Focus Hook Mounting Point
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 3 7