RED RANGER MONSTRO 8K VV Operation Manual page 198

RED RANGER OPERATION GUIDE
TIMECODE
The LEMO EAG.0B.305.CLN connector supports SMPTE timecode input and output. Pins 2 and 3 can be used
together to receive a balance SMPTE 12M serial timecode input. Pin 2 can be used by itself (leave pin 3 open) to
receive a single-ended SMPTE 12M serial timecode input. Pin 5 is a timecode output.
Figure: Front Face of Timecode (LEMO EAG.0B.305.CLN) Connector (Looking at the Camera)
PIN SIGNAL
1 GROUND
2 TIMECODE IN(S)
3 N/A
4 +5 V OUT
5 TIMECODE OUT
NOTE: Mating connector is FHG.0B.305.CLAD.
COMPATIBLE CABLE
790-0212: Pro I/O Time Code Cable 3'
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
LEMO EAG.0B.305.CLN CONNECTOR
DESCRIPTION
Camera Ground
Timecode input - SMPTE single ended
No connection (NC)
+5 V out, 200 mA max
SMPTE 12 M Timecode output
DIRECTION
N/A
In
N/A
Out
Out
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 1 9 8