MOTO GUZZI V85 TT Service Station Manual page 54

Electrical system
TABLE B2 - COMPLETE TAILLIGHT AND LI-
CENCE PLATE HOLDER (PRE-ASSEMBLY)
1. Fastening clip
2. Grey reference for positioning
TABLE B3 - COMPLETE TAILLIGHT AND LI-
CENCE PLATE HOLDER (PRE-ASSEMBLY)
1. Wire from wiring harness
2. Taillight wire
Connect the taillight and hook it to the support
TABLE B4 - COMPLETE TAILLIGHT AND LI-
CENCE PLATE HOLDER (PRE-ASSEMBLY)
1. Fastener clip
2. Licence plate light
Insert the licence plate light (2) in the specific lodg-
ing and connect the right indicator to the wiring
harness. Arrange the cables as illustrated in the
figure.
TABLE B5 - COMPLETE TAILLIGHT AND LI-
CENCE PLATE HOLDER (PRE-ASSEMBLY)
1. Fastener clip
ELE SYS - 54
V85 TT