V85 TT
Specific operations for the vehicle
WINDSHIELD KIT ASSEMBLY
•
The box containing the windshield is in
the vehicle packaging. The installation
hardware is mounted on the windshield
bracket assembled to the vehicle
•
Installation begins with the removal of
the mounting hardware from the wind-
shield bracket (for each of the four fas-
tening points, made up of: rubber
piece, bushing and screw)
•
Subsequently, the four rubber pieces
(1) are fitted in the respective holes on
the windshield, avoiding the use of
tools that can damage or scratch the
component
•
The bushings (2) should be inserted in
the holes of the rubber pieces from the
front side of the windshield
•
The windshield should then be rested
on the relative bracket on the vehicle
and, supporting it firmly, the screws
should be fastened (3), tightening them
to the torque indicated on the chart
Tightening torque chart
Windshield fastening to windshield bracket
HANDGUARDS AND REAR VIEW MIRRORS
KIT ASSEMBLY
•
The box containing the right and left
handguards, the anti-vibration weights
and the hardware required for assem-
bling the aforementioned components
is in the vehicle packaging
•
There is also a box containing the rear
view mirrors
W
INDSHIELD KIT TIGHTENING TORQUES
Tightening torques
Residual torque Nm
Nm (lbf ft)
10 Nm (7.38 lb ft)
8 Nm (5.90 lb ft)
Pre-delivery
(lbf ft)
PRE DE - 253