V85 TT
•
At this point, on the digital display of the
motorcycle, after the automatic restart
of the dynamic presentation screen, a
message will appear with a countdown
of 20 seconds to insert the second key
to be programmed.
•
Set key to "OFF", insert the second key
and set to "ON".
CAUTION
IF YOU DO NOT HAVE A SECOND KEY OR YOU DON'T
WANT TO STORE ONE, THE DIAGNOSTIC TOOL WILL
SHOW AN ERROR SAYING "1 KEY STORED"
•
The second key is stored and you will
be asked to enter the third key (if you
have one). The same operation will be
repeated to store the fourth key.
•
To complete AND end the memorisa-
tion procedure, set key to "OFF".
•
You should then test the correct func-
tioning of all keys stored.
Azzeramento icona manutenzione
The system displays the function as follows:
•
After the maintenance interval thresh-
olds are exceeded (excepting the first),
an icon with the adjustable wrench is
shown on the digital display.
To reset Service proceed as follows:
•
Connect the diagnostic tool;
•
Select the concerned model;
•
Enter in the "INSTRUMENT PANEL"
section;
•
Select "SELF-DIAGNOSIS";
•
Select "ACTIVATIONS";
•
Enable the command "SERVICE RE-
SET".
Electrical system
ELE SYS - 61