MOTO GUZZI V85 TT Service Station Manual page 178

Braking system
•
Remove the brake pads (6) one at a
time
CAUTION
AFTER REMOVING THE PADS, DO NOT OPERATE THE
BRAKE LEVER OR THE CALLIPER PLUNGERS COULD
GO OUT OF THEIR SEATS RESULTING IN BRAKE FLUID
LEAKAGE.
Installing
The following procedure is described for a single
calliper, but is valid for both front brake callipers
•
Insert the new pads correctly (1)
CAUTION
ALWAYS REPLACE BOTH PADS AND MAKE SURE THEY
ARE CORRECTLY POSITIONED INSIDE THE CALLIPER.
•
Insert the spring (2)
•
Insert the two pins (3)
BRAK SYS - 178
V85 TT