MOTO GUZZI V85 TT Service Station Manual page 255

V85 TT
•
Place the battery in the appropriate
lodging and connect it, taking care to
observe the polarity
•
Refit the battery cover, inserting it in
the appropriate lodgings as indicated
in figure "C"
•
Insert the screws (1) in the appropriate
holes, observing the tightening torque
indicated on the attached chart
•
Refit the saddle, hooking it in the front
part in the appropriate lodgings in cor-
respondence to the fuel tank and lower
it at the rear, ensuring that the saddle
lock has clicked.
Tightening torque chart
Fastening batter cover to frame
B
ATTERY COVER KIT TIGHTENING TORQUES
Tightening torques Residual torque Nm
Nm (lbf ft)
10 Nm (7.38 lb ft) 8 Nm (5.90 lb ft)
Pre-delivery
(lbf ft)
PRE DE - 255