MOTO GUZZI V85 TT Service Station Manual page 95

V85 TT
•
Remove the complete plunger (13).
•
Observing the indicated sequence, ex-
tract and remove the slider bushing
(14), the guide bushing (15), the ring
(16), the oil seal (17), the seeger ring
(10) and the dust guard (9).
THE FOLLOWING OPERATIONS APPLY WHEN
REMOVING THE RIGHT HAND STEM
•
Taking care not to damage it, secure
the fork vertically in a vice, using the
appropriate protection devices.
•
Unscrew the upper cap (1).
Specific tooling
AP8140149 Guard for assembly operations
•
Ensure that the cap (1) cannot rotate,
and then loosen the special nut (2).
Suspensions
SUSP - 95