V85 TT
•
Tighten the cap on the sleeve, applying
the pre-defined torque.
THE FOLLOWING OPERATIONS APPLY WHEN
MOUNTING THE LEFT HAND STEM
•
Observing the indicated sequence, ex-
tract and remove the dust guard (1),
the seeger ring (2), the oil seal (3), the
ring (4), the guide bushing (5) and the
slider bushing (6).
•
- Insert the stem in the sleeve.
•
Using a suitable tool, complete with
striking hammer, insert oil seal into its
housing (3).
Specific tooling
AP8140189 Tool for fitting oil seal for 43 mm
(1.69 in) diameter hole
AP8140146 Weight
Suspensions
SUSP - 103