Electrical system
TABLE B8 - INSTRUMENT CLUSTER PRE-AS-
SEMBLY AND ASSEMBLY ON THE BIKE
1. Instrument panel connector
2. Front headlamp connector
Assemble the front light cluster and, after connect-
ing it, fastened the connector to the frame support
as illustrated in the figure
TABLE C - FRONT TURN INDICATORS
1. Right turn indicator connection
During installation one wire must be covered and
the other with sheath
TABLE C1 - FRONT TURN INDICATORS
1. Left turn indicator connection
During installation one wire must be covered and
the other with sheath
TABLE C2 - FRONT TURN INDICATORS
•
Proceed as indicated in the figure
Once the turn connectors are connected, fasten
the cables behind the instrument cluster
ELE SYS - 40
V85 TT