Replacement - MOTO GUZZI V85 TT Service Station Manual

V85 TT
DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO
THE FLUID. WHEN USING A FUNNEL OR ANY OTHER EL-
EMENT, MAKE SURE IT IS PERFECTLY CLEAN.

Replacement

CAUTION
THE UNIT MUST BE HOT WHEN THE OIL IS CHANGED AS UNDER SUCH CONDITIONS OIL IS
FLUID AND THEREFORE EASY TO DRAIN.
NOTE
RIDE SOME km (miles) TO WARM UP ENGINE OIL
•
Place a recipient with a capacity of at least 400 cc (25 cu.in) under the drain plug (2).
•
Unscrew and remove the drainage plug (2).
•
Unscrew and remove the breather cap (1).
•
Drain the oil into the container; allow several minutes for oil to drain out completely.
•
Check and if necessary, replace the sealing washer of drainage plug (2).
•
Remove any metal scrap attached to the drainage plug (2) magnet.
•
Screw and tighten the drainage plug (2).
•
Pour new oil through the fill opening until it reaches the cap/dipstick hole (1).
CAUTION
DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO THE FLUID. WHEN USING A FUNNEL
OR ANY OTHER ELEMENT, MAKE SURE IT IS PERFECTLY CLEAN.
NOTE
THE RECOMMENDED QUANTITY OF OIL FOR REPLACEMENT IS 180 cc (10.98 cu in)
Recommended products
75W-140 lubricant for gearboxes and transmissions Synthetic lubricant for gearboxes and
transmissions
SAE 75W-140 - API GL5
•
Screw and tighten the caps (1 - 2).
Check
Check the engine oil level frequently.
NOTE
Maintenance
MAIN - 19