Braking system
•
In OFF ROAD mode, the ABS system
deactivates automatically for the rear
wheel.
CAUTION
ONLY IN THIS MODE DOES THE ABS SYSTEM STAY AC-
TIVE EXCLUSIVELY FOR THE FRONT WHEEL AND THE
DEDICATED SYMBOL APPEARS ON THE DISPLAY TO RE-
MIND THE RIDER TO TAKE PARTICULAR CARE.
Modulator
REMOVAL
•
Remove the engine from the vehicle
PREPARING THE VEHICLE
•
Connect the bleeder bottles to the front
and rear calliper bleeder screws and
open them.
•
Press the front brake lever and the rear
brake pedal as far as they will go and
block them in position using the clamp-
ing devices. Close the front and rear
calliper bleeder screws and remove
the bleeder bottle
•
Mark a reference on the pipes and on
the ABS control unit to avoid inverting
them when refitting
•
Undo and remove the screw (1)
•
Undo and remove the screw (2)
BRAK SYS - 168
V85 TT