Suspensions
•
Refit the rubber gasket (3)
•
Mount the upper ring nut (2), manually
tightening it more than 90° so that the
necks of both ring nuts correspond with
one another
•
Correctly reposition the safety washer
(1)
Disassembling
•
Remove the lower steering yoke
UPPER STEERING BEARING
•
Remove the upper seat (1) of the upper
steering bearing
•
Remove the upper steering bearing (2)
•
Using a generic bearing puller, remove
the lower seat of the steering bearing
as illustrated in the figure
SUSP - 112
V85 TT